Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector and install the wiring harness retainers as necessary.
Hood Primary and Secondary Latch (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Stowage Compartment Latch Actuator Cable (1) - Install [2x]
Hood Primary and Secondary Latch Release Cable (2) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Hood Primary and Secondary Latch Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Trim Finish Compartment (2) - Install - Front Trim Finish Compartment Removal and Installation