Installation Procedure

Courtesy of GM

Hood Hinge (2) - Install

CAUTION:

Refer to Fastener Caution .

Hood Hinge Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GM

NOTE:
Ensure the clip is fully seated when the rod is reinstalled. If the clip cannot be fully seated, a new rod should be installed.

Hood Strut (2) - Install
Install the 2 metal clips (1) to each end of the hood strut (2).
Courtesy of GM

With the aid of an assistant, install the hood (2).
Hood Hinge Nut (1) - Install and tighten [4x] - Fastener Specifications
Adjust if necessary. Hood Adjustment