Installation Procedure
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
-
Transmission Mount (2) - Install
- Hand start the 4 transmission mount bolts (1).
- Transmission Mount Bolt (1) - Install and tighten in sequence [4x] 100 N.m (74 lb ft)
Transmission Mount Bolt (1) - Install and tighten [2x] 58 N.m (43 lb ft)
Transmission Mount Brace (2) - Install
- Transmission Mount Brace Bolt (1) - Install and tighten [2x] 22 N.m (16 lb ft)
- Perform the powertrain mount balancing procedure.
- 3.6L (LGX) Powertrain Mount Balancing
- 2.0L (LSY) Powertrain Mount Balancing (FWD)
- Remove the engine support fixture.
- 3.6L (LGX) Engine Support Fixture
- 2.0L (LSY) Engine Support Fixture
- Install the battery tray. Battery Tray Replacement
CAUTION:
Refer to Fastener Caution .
CAUTION:
The stated fastener removal or installation sequence must be followed to avoid damage to the components of the mount assembly.