Installation Procedure
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Install the input speed sensor seal (3).
- Install the input speed sensor (2).
- Install the input speed sensor bolt (1) and tighten to 9 N.m (80 lb in).
- Connect the input speed sensor electrical connector.
- Remove the drain pan.
- Install the left front wheel house liner. Front Wheelhouse Liner Replacement .
- Check the transmission fluid level and fill with the correct fluid. Transmission Fluid Level and Condition Check
- Perform the transmission service fast learn procedure. Transmission Service Fast Learn Procedure .
CAUTION:
Refer to Fastener Caution .