Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Engine Oil Level Indicator Control Module Wiring Harness - Remove - Engine Oil Level Indicator Control Module Wiring Harness Replacement
- Exhaust Front Pipe - Remove Exhaust Front Pipe Replacement (LTG)Exhaust Front Pipe Replacement (LYX)
Remove the transmission bolts.(1, 2, 3) Transmission Replacement (FWD)Transmission Replacement (AWD)
- Torque Converter Cover(4) - Remove
- NOTE:
Mark the position of the oil pan bolts because of different length.
Remove the oil pan bolts.(1, 2)
- Carefully pry the oil pan loose and remove.
- For part transfer, cleaning and inspection Oil Pan Cleaning and Inspection (FWD) Oil Pan Cleaning and Inspection (AWD) .