Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Attach the mechanics wire to the new cable and guide the cable in.
Connect the hood primary latch release cable grommet (1) to the plenum upper panel.
Attach the hood primary latch release cable to the retainer (2).
Courtesy of GENERAL MOTORS COMPANY

Connect the hood primary latch release cable (1) to the inside handle. Hood Primary Latch Release Cable Handle Replacement
Courtesy of GENERAL MOTORS COMPANY

Attach the hood primary latch release cable (3) to the retainers (2).
Connect the cable end retainer (1) to the latch.
Courtesy of GENERAL MOTORS COMPANY

Air Inlet Grille Panel (1) - Install - Air Inlet Grille Panel Replacement .