Windshield Wiper Transmission Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
1	Windshield Wiper Transmission Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Windshield Wiper Transmission Procedure Disconnect the windshield wiper motor electrical connector. Remove the windshield wiper transmission from the vehicle. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

Windshield Wiper Transmission Bolt (Qty: 3)

CAUTION:

Tighten
9 N.m (80 lb in)

Windshield Wiper Transmission

Procedure