Air Inlet Grille Panel Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement . Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement .
1	Cowl Side Panel Baffle Retainer (Qty: 2)
2	Cowl Side Panel Baffle (Qty: 2)
3	Air Inlet Grille Panel Push-Pin Retainer (Qty: 8)
4	Windshield Washer Nozzle Hose Procedure Disconnect the windshield washer nozzle hose from the windshield washer pump hose.
5	Air Inlet Grille Panel Procedure Use an appropriate tool to remove all 8 push-pins of the air inlet grille panel push-pin retainer. Lift the air inlet grille panel over the wiper motor pivot shafts. Remove the air inlet grille panel from the vehicle. Transfer parts as needed. NOTE: Ensure damaged grille push-pin retainers are replaced with correct part. Never substitute grille panel push-pin retainers.