Front Fender Paint Protector Replacement (With Bison)

GM5144937

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Front Wheel Opening Molding Replacement (ZR2) Front Wheel Opening Molding Replacement (Bison)

1

Front Fender Paint Protector Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

2

Front Fender Paint Protector

Procedure

Apply two layers of masking tape around the front fender paint protector to prevent any paint surface damage.
Using a suitable flat bladed plastic trim tool, release the front fender paint protector retainers from the front fender.
Using a 50/50 mixture of isopropyl alcohol and clean drinkable water and a clean towel, remove the left over adhesive residue from the masking tape.