Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove Engine Oil Level Indicator Control Module Wiring Harness - Engine Oil Level Indicator Control Module Wiring Harness Replacement
- Remove Exhaust Front Pipe - Exhaust Front Pipe Replacement (LYX)
- Remove the transmission bolts (1, 2, 3)Transmission Replacement (Front Wheel Drive except Diesel Engine)Transmission Replacement (All Wheel Drive except Diesel Engine)
- Remove Torque Converter Cover (4)
- Remove the oil pan bolts (1, 2)
- Carefully pry the oil pan loose and remove.
- For part transfer, cleaning and inspection Oil Pan Cleaning and Inspection .
NOTE:
Mark the position of the oil pan bolts because of different length.