Installation Procedure
WARNING: This page is about a different variant/trim than selected.
Fuel Tank Filler Hose (4) - Install
- Fuel Tank Filler Hose Clamp (3) - Install and tighten 4 N.m (35 lb in)
- Evaporative Emission Canister Vent Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service
- Tie Strap (1) - Install NEW
Fuel Tank Filler Pipe Bolt (2) - Install and tighten 9 N.m (80 lb in)
- Tie Strap (1) - Install NEW (Qty: 2)
Fuel Tank Filler Pipe Bolt (2) - Install and tighten 2.5 N.m (22 lb in)
- Tie Strap (1) - Install NEW
- Rear Wheelhouse Liner - Install - Rear Wheelhouse Liner Replacement
CAUTION:
Refer to Fastener Caution .