Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble the oil pan as necessary. Oil Pan Assemble (LGX RWD)
- Oil Pan Install - Oil Pan Installation (LGX RWD)
- Install the lower transmission to engine bolts. Transmission Replacement (M5N with LGX Engine)
- Catalytic Converter Brace Bracket Install - Catalytic Converter Brace Bracket Replacement (LGX)
- Install the transmission fluid cooler pipe clip bolts at the oil pan. Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With RWD, Without V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With RWD, With V03)
- Engine Mount Bracket - Install - Engine Mount Bracket Replacement - Left Side (LGX) , and Engine Mount Bracket Replacement - Right Side (LGX - RWD)
- Engine Oil Cooler Inlet Pipe Install - Engine Oil Cooler Pipe Replacement (LGX, Inlet)Engine Oil Cooler Pipe Replacement (LGX, Outlet)
- Engine Oil Cooler Outlet Pipe Install - Engine Oil Cooler Pipe Replacement (LGX, Inlet)Engine Oil Cooler Pipe Replacement (LGX, Outlet)
- Engine Oil Level Indicator Switch - Connect the electrical connector.
- Drivetrain and Front Suspension Cradle Install - Drivetrain and Front Suspension Cradle Replacement (V-Series)Drivetrain and Front Suspension Cradle Replacement (Non V-Series)
- Oil Level Indicator Tube Install - Oil Level Indicator Tube Replacement (LGX)
- Fill the engine oil to the proper level. Engine Oil and Oil Filter Replacement (LGX, RWD) .
- Fill the engine oil to the proper level. Approximate Fluid Capacities , and Adhesives, Fluids, Lubricants, and Sealers (LGX)
- Start the engine and inspect for leaks.