Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Power Brake Booster Vacuum Hose Assembly - Install
- Power Brake Booster Vacuum Hose Quick Connect @ Vacuum Pump - Connect
- Vacuum Hose @ Engine Mount - Connect
- Retainer and Clip - Install
- Air Cleaner Outlet Front Duct Replacement (LF4) - Install
- Retainer and Clip - Install
- Power Brake Booster Vacuum Hose Quick Connect @ Intake Manifold - Connect
- Power Brake Booster Vacuum Sensor - Install
- Connect the power brake booster vacuum sensor electrical connector.
- Charge Air Cooler Inlet Pipe Replacement - Left Side - Install
- Charge Air Bypass Valve Replacement - Left Side - Install
- Front End Sheet Metal Diagonal Brace Replacement - Left Side (ATS-V)Front End Sheet Metal Diagonal Brace Replacement - Left Side - Install
NOTE:
A small amount of denatured alcohol may be used to ease assembly.