Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition Coil -Install
- Ignition Coil Bolt -Install and tighten 10 N.m (89 lb in)
- Electrical Connector @Ignition Coil -Connect
- Install the Bank 1 Camshaft Cover to Air Outlet Duct - Positive Crankcase Ventilation Tube. Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LF4 - Intake Manifold to Camshaft Cover)Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LF4 - Bank 1 Camshaft Cover to Air Outlet Duct)
- Charge Air Cooler Inlet Pipe Replacement - Right Side -Install
CAUTION:
Refer to Fastener Caution .