Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel Pipe Shield -Install
- Retainer -Install
- Fuel Pipe Shield Fastener -Install and tighten 9 N.m (80 lb in)
- Fuel Pipe Shield Fastener -Install and tighten 9 N.m (80 lb in)
- Plenum Front Panel Replacement -Install
- Hood ReplacementHood Replacement (ATS-V) -Install
CAUTION:
Refer to Fastener Caution .