Hood Replacement

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood & Mounting Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Hood Hinge Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Procedure Mark the hood or hinge position in order to aid in hood installation. Tighten 22 N.m (16 lb ft)
2	Hood Procedure Remove the hood from the vehicle with the aid of an assistant. Transfer parts as needed. Adjust the hood if needed. Refer to Hood Adjustment Hood Adjustment (ATS-V) .

Callout

Component Name

Hood Hinge Nut (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Procedure
Mark the hood or hinge position in order to aid in hood installation.
Tighten
22 N.m (16 lb ft)

Hood

Procedure

Remove the hood from the vehicle with the aid of an assistant.
Transfer parts as needed.
Adjust the hood if needed. Refer to Hood Adjustment Hood Adjustment (ATS-V) .