Fuel Feed Pipe Replacement (LGX at Engine)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Feed Pipe - At Engine (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Fuel Pressure Relief Intake Manifold Replacement (LGX) Engine Rear Noise Shield Replacement (LGX)
1	Fuel Feed Pipe Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Quick Connect Fitting Metal Collar Quick Connect Fitting Service
3	Fuel Feed Pipe Procedure Ensure that the high pressure fuel pipe, and fuel pump fittings are clean and dry prior to assembly. Pressurize the fuel system and check for leaks.