Engine Rear Noise Shield Replacement (LGX)

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Rear Noise Shield (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Cooling System Draining and Filling (Static)Cooling System Draining and Filling (GE 47716) Fuel Pipe Shield Replacement (LGX) Unbolt and reposition the heater inlet and outlet pipe. Heater Inlet And Outlet Pipe Replacement (LGX)
1	Engine Rear Noise Shield Procedure WARNING: The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death. NOTE: The engine noise shield snaps into place. Unsnap the engine noise shield from the rear of the engine.

Callout

Component Name

Preliminary Procedures

Drain the cooling system. Cooling System Draining and Filling (Static)Cooling System Draining and Filling (GE 47716)
Fuel Pipe Shield Replacement (LGX)
Unbolt and reposition the heater inlet and outlet pipe. Heater Inlet And Outlet Pipe Replacement (LGX)

Engine Rear Noise Shield
Procedure

WARNING:

The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.

NOTE:

The engine noise shield snaps into place.

Unsnap the engine noise shield from the rear of the engine.