LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 417 (Engine Mechanical - 3.6L (LGX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Mount Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Mount Fastener And Mount
    GM4298471Courtesy of GENERAL MOTORS COMPANY
  1. Install Engine Mount (3)
    2. NOTE:

    Do not tighten the engine mount fasteners at this time.

  2. Install Engine Mount Fastener (2)
    3. NOTE:

    Do not tighten the engine mount fasteners at this time.

  3. Install Engine Mount Fastener (1)
  4. Preform the powertrain mount balance procedure. Powertrain Mount Balancing 
    5. CAUTION:

    Refer to Fastener Caution .

  5. Tighten the engine mount-to-body bolts (1) to 58 N.m (43 lb ft)
    6. Fig 2: Engine Mount Brace Bolt And Brace
    GM4298347Courtesy of GENERAL MOTORS COMPANY
  6. Install Engine Mount Brace (2)
  7. Install Engine Mount Brace Bolt (1) and tighten 22 N.m (16 lb ft)
  8. Remove Engine Support Fixture - Engine Support Fixture 
  9. Install Air Cleaner Assembly - Air Cleaner Assembly Replacement
scientia non olet · About LEMON Manuals