LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 396 (Automatic Transmission Cooling System) >> Repair Instructions >> Transmission Fluid Cooler Outlet Pipe Replacement (M2D with V08) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Front Bumper Fascia - Front Bumper Fascia Replacement
  2. Remove Battery Tray - Battery Tray Replacement
  3. Remove Front Compartment Splash Shield - Front Compartment Splash Shield Replacement
    4. Fig 1: Transmission Fluid Cooler Pipe Nut
    GM4372706Courtesy of GENERAL MOTORS COMPANY
  4. Remove Transmission Fluid Cooler Pipe Nut (2).
  5. Remove Transmission Fluid Cooler Outlet Pipe (1) @Transmission
    6. Fig 2: Transmission Fluid Cooler Pipe Fitting Seal
    GM4233917Courtesy of GENERAL MOTORS COMPANY
  6. Remove Transmission Fluid Cooler Pipe Fitting Seal (1) and DISCARD
    7. Fig 3: Transmission Fluid Cooler Outlet Pipe
    GM4372702Courtesy of GENERAL MOTORS COMPANY
  7. Remove Transmission Fluid Cooler Outlet Pipe (2) @Transmission Fluid Cooler Inlet and Outlet Pipe Retainer (1)
    8. Fig 4: Transmission Fluid Cooler Outlet Pipe
    GM4373547Courtesy of GENERAL MOTORS COMPANY
  8. Remove Transmission Fluid Cooler Outlet Pipe (1) @Transmission Fluid Cooler Thermal Bypass Valve (2) - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 
  9. Cap the openings to prevent contamination.
  10. Remove Transmission Fluid Cooler Outlet Pipe
  11. Transfer components as necessary.
scientia non olet · About LEMON Manuals