LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 396 (Automatic Transmission Cooling System) >> Repair Instructions >> Transmission Fluid Cooler Inlet Pipe Replacement (M2D with V08) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Front Bumper Fascia - Front Bumper Fascia Replacement
  2. Remove Battery Tray - Battery Tray Replacement
    3. Fig 1: Transmission Fluid Cooler Pipe Nut
    GM4373079Courtesy of GENERAL MOTORS COMPANY
  3. Remove Transmission Fluid Cooler Pipe Nut (1)
  4. Remove Transmission Fluid Cooler Inlet Pipe (2) @Transmission
    5. Fig 2: Transmission Fluid Cooler Inlet Pipe
    GM4372695Courtesy of GENERAL MOTORS COMPANY
  5. Remove Transmission Fluid Cooler Inlet Pipe (1) @Transmission Fluid Cooler Inlet and Outlet Pipe Retainer (2)
    6. Fig 3: Transmission Fluid Cooler Pipe Fitting Seal
    GM4233917Courtesy of GENERAL MOTORS COMPANY
  6. Remove Transmission Fluid Cooler Pipe Fitting Seal (1) and DISCARD
    7. Fig 4: Transmission Fluid Cooler Inlet Pipe
    GM4373553Courtesy of GENERAL MOTORS COMPANY
  7. Remove Transmission Fluid Cooler Inlet Pipe (1) @Transmission Fluid Cooler Thermal Bypass Valve (2) - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 
  8. Cap the openings to prevent contamination.
  9. Remove Transmission Fluid Cooler Inlet Pipe
  10. Transfer components as necessary.
scientia non olet · About LEMON Manuals