LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Clutch Drive Plate Adjustment

Air Conditioning Clutch Drive Plate Adjustment

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Measuring Air Gap Between Pulley & Drive Plate
    GM2073711Courtesy of GENERAL MOTORS COMPANY
  1. Install the clutch plate assembly. Refer to Air Conditioning Clutch Assembly Replacement .
    2. NOTE:

    Ensure the drive plate does not drag against the pulley when the pulley is rotated.

  2. Measure the air gap between the pulley and the drive plate. Adjust the shims to achieve a 0.4-0.70 mm (0.015-0.028 in) air gap.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the clutch plate retaining bolt and tighten to 18 N.m (13 lb ft).
scientia non olet · About LEMON Manuals