LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Engine Mechanical - 2.5L (LCV)) >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Lower Oil Pan. Refer to Lower Oil Pan Replacement (AWD) Lower Oil Pan Replacement (2WD) 
    2. Fig 1: Oil Level Sensor Electrical Connector And Fasteners
    GM4244683Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the oil level sensor electrical connector (1).
  3. Remove the engine oil level sensor fasteners (2).
    4. Fig 2: Engine Oil Level Sensor Connector And C-clip
    GM4244692Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine oil level sensor C-clip (1).
  5. Push the sensor connector (2) through the oil pan to remove.
    6. Fig 3: Engine Oil Level Sensor And O-Ring
    GM4244703Courtesy of GENERAL MOTORS COMPANY
  6. Remove the engine oil level sensor (1) from the oil pan.
scientia non olet · About LEMON Manuals