Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Install Engine Coolant Fan (2) @ Radiator. Refer to Engine Coolant Fan Replacement (LCV LGX)
- Install Engine Coolant Fan Module Radiator (1)
- Install Radiator Upper Bracket (2). Refer to Radiator Upper Bracket Replacement (Right Side)
- Install Radiator Upper Bracket (2). Refer to Radiator Upper Bracket Replacement (Left Side)
- Install Transmission Fluid Auxiliary Cooler Outlet Pipe (3). Refer to Transmission Fluid Auxiliary Cooler Outlet Pipe Replacement (LCV)
- Install Transmission Fluid Auxiliary Cooler Inlet Pipe (3). Refer to Transmission Fluid Auxiliary Cooler Inlet Pipe Replacement (LCV)
- Install Air Conditioning Condenser (1). Refer to Air Conditioning Condenser Replacement (Without V08)
- Install Radiator Air Side Upper Baffle (1). Refer to Radiator Air Side Upper Baffle Replacement
- Install Radiator Air Lower Baffle (1). Refer to Radiator Air Lower Baffle Replacement (LGX without V08)
- Connect Wiring Harness @ Engine Coolant Fan
- Connect Electrical Connector (1) @ Engine Coolant Fan
- Install Radiator Inlet Hose (2) @ Radiator. Refer to Radiator Outlet Hose Replacement (LGX without V08)
- Install Radiator Surge Tank Inlet Hose (2) @ Radiator. Refer to Radiator Surge Tank Inlet Hose Replacement (LGX From Radiator Surge Tank to Radiator and Radiator Surge Tank Outlet Pipe)
- Install Radiator Outlet Hose (2) @ Radiator. Refer to Radiator Outlet Hose Replacement (LGX without V08)
- Install Front Bumper Fascia Center Support - Upper (4). Refer to Front Bumper Fascia Center Support Replacement - Upper
- Install Front Bumper Fascia Center Support (2). Refer to Front Bumper Fascia Center Support Replacement
- Install Intake Air Splash Shield (3). Refer to Intake Air Splash Shield Replacement
- Install the front bumper fascia. Refer to Front Bumper Fascia Replacement
- Fill the cooling system to the proper level. Refer to Cooling System Draining and Filling (GE-47716) Cooling System Draining and Filling (Static)
- Start the engine and check for coolant leaks.