Installation Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Install Engine Coolant Fan Module Radiator (1)
- Install Radiator Upper Bracket (2). Refer to Radiator Upper Bracket Replacement (Right Side)
- Install Radiator Upper Bracket (2). Refer to Radiator Upper Bracket Replacement (Left Side)
- Install Air Conditioning Condenser (1). Refer to Air Conditioning Condenser Replacement (With V08)
- Install Transmission Fluid Cooler Thermal Bypass Valve (3). Refer to Transmission Fluid Cooler Thermal Bypass Valve Replacement (V08)
- Install Transmission Fluid Cooler Pipe (2) @ Radiator. Refer to Transmission Fluid Cooler Pipe Replacement (LGX with V08)
- Install Transmission Fluid Auxiliary Cooler (2). Refer to Transmission Fluid Auxiliary Cooler Replacement (with V08)
- Install Radiator Air Side Upper Baffle (1). Refer to Radiator Air Side Upper Baffle Replacement
- If equipped, Install Radiator Air Upper Baffle (1). Refer to Radiator Air Upper Baffle Replacement (LGX)
- Install Radiator Air Front Lower Baffle (1). Refer to Radiator Air Front Lower Baffle Replacement (LGX)
- Connect Wiring Harness @ Engine Coolant Fan
- Connect Electrical Connector (1) @ Engine Coolant Fan
- Install Radiator Inlet Hose (2) @ Radiator. Refer to Radiator Inlet Hose Replacement (LGX)
- Install Radiator Surge Tank Inlet Hose (2) @ Radiator. Refer to Radiator Surge Tank Inlet Hose Replacement (LGX From Radiator Surge Tank to Radiator and Radiator Surge Tank Outlet Pipe)
- Install Radiator Outlet Hose (2) @ Radiator. Refer to Radiator Outlet Hose Replacement (LGX Radiator Outlet Hose Tee to Radiator)
- Install Intake Air Splash Shield (3). Refer to Intake Air Splash Shield Replacement
- Install the front bumper fascia. Refer to Front Bumper Fascia Replacement
- Fill the cooling system to the proper level. Refer to Cooling System Draining and Filling (GE-47716) Cooling System Draining and Filling (Static)
- Start the engine and check for coolant leaks.