Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Without disconnecting the hoses, remove and position aside the radiator surge tank. - Radiator Surge Tank Replacement (LGX with V08)Radiator Surge Tank Replacement (LCV)
- Remove and properly dispose of the brake fluid in the master cylinder reservoir.
- Disconnect Brake Fluid Level Indicator Switch Electrical Connector
- Disconnect Brake Pressure Modulator Valve Master Cylinder Reservoir Front Brake Pipe Fitting (1)
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Disconnect Brake Pressure Modulator Valve Master Cylinder Reservoir Rear Brake Pipe Fitting (1)
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Remove Brake Master Cylinder Nut (1) and DISCARD
- Remove Brake Master Cylinder Assembly (1)
- Remove Brake Master Cylinder Gasket (1) and DISCARD
- Remove Brake Master Cylinder Reservoir - Master Cylinder Reservoir Replacement