Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Remove Rear Seat Back Cushion Cover and Pad (1, 2). Refer to Rear Seat Back Cushion Cover and Pad Replacement (40%)
- Remove Rear Seat Cushion Cover and Pad (3). Refer to Rear Seat Cushion Cover and Pad Replacement (40%)
- Remove Rear Seat Inner Recliner Cable (1). Refer to Rear Seat Inner Recliner Cable Replacement (Upper) Rear Seat Inner Recliner Cable Replacement (Lower)
- Remove Rear Seat Cushion Frame Bolt-Upper (1) (Qty: 2)
- Remove Rear Seat Cushion Frame Bolt-Front (2) (Qty: 2)
- Remove Rear Seat Cushion Frame (3)
- Remove Rear Seat Frame Nut (1) (Qty: 4)
- Remove Rear Seat Back Panel Bolt (2)
- Remove Rear Seat Back Panel (3)
- Remove Rear Seat Frame Nuts (1) (Qty: 4)
- Remove Rear Seat Frame Stanchion (2)
- Remove Rear Seat Cushion Bracket Fastener (1) (Qty: 2)
- Remove Rear Seat Cushion Bracket Washer (2) (Qty: 2)
- Remove Rear Seat Cushion Bracket (3)
- Remove Rear Seat Support (4)
- Transfer components as necessary.