LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> 3rd Row Seat Back Cover and Pad Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: 3rd Row Seat Back Cover and Pad
    GM4381035Courtesy of GENERAL MOTORS COMPANY
  1. Install 3rd Row Seat Back Pad (2)
  2. Install 3rd Row Seat Back Cover (1)
    3. Fig 2: Rear Seat Anchor Plate Bezel
    GM4318445Courtesy of GENERAL MOTORS COMPANY
  3. Install Rear Seat Anchor Plate Bezel (1). Refer to Rear Seat Anchor Plate Bezel Replacement 
    4. Fig 3: 3rd Row Seat Head Restraint Guide
    GM4143750Courtesy of GENERAL MOTORS COMPANY
  4. Install 3rd Row Seat Head Restraint Guide (1). Refer to 3rd Row Seat Head Restraint Guide Replacement 
    5. Fig 4: 3rd Row Seat Head Restraint
    GM4378959Courtesy of GENERAL MOTORS COMPANY
  5. Install 3rd Row Seat Head Restraint (1). Refer to 3rd Row Seat Head Restraint Replacement 
  6. Connect the head restraint cable to the rear seat pull strap.
  7. Close the seat back cushion cover zippers.
  8. Engage the J-channel retainers to the seat back cushion frame.
    9. Fig 5: Rear Seat Anchor Plate Bezel
    GM4318445Courtesy of GENERAL MOTORS COMPANY
  9. Install Rear Seat Anchor Plate Bezel (1). Refer to Rear Seat Anchor Plate Bezel Replacement 
    10. Fig 6: 3rd Row Seat
    GM4375342Courtesy of GENERAL MOTORS COMPANY
  10. Install 3rd Row Seat (4). Refer to 3rd Row Seat Removal and Installation 
scientia non olet · About LEMON Manuals