3rd Row Seat Head Restraint Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 3rd Row Seat Head Restraint

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Reposition the seat back cover and pad. Refer to 3rd Row Seat Back Cover and Pad Replacement
1	3rd Row Seat Head Restraint Procedure Disconnect the head restraint cable from the rear seat pull strap. Raise the head restraint to gain access to the head restraint guide bezel. Twist the bezel counter clockwise and push the bezel upward on the head restraint adjuster rod. Using a suitable pointed or flat bladed tool, push the head restraint clip rearward while pulling upward on the head restraint.

Callout

Component Name

Preliminary Procedure
Reposition the seat back cover and pad. Refer to 3rd Row Seat Back Cover and Pad Replacement

3rd Row Seat Head Restraint

Procedure

Disconnect the head restraint cable from the rear seat pull strap.
Raise the head restraint to gain access to the head restraint guide bezel.
Twist the bezel counter clockwise and push the bezel upward on the head restraint adjuster rod.
Using a suitable pointed or flat bladed tool, push the head restraint clip rearward while pulling upward on the head restraint.