Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Using a suitable tool, remove and properly discard the brake fluid from the master cylinder reservoir.
- Remove the brake fluid level indicator switch. Refer to Brake Fluid Level Indicator Switch Replacement
- Remove Plenum Front Panel. Refer to Plenum Front Panel Replacement
- If equipped, disconnect the clutch master cylinder feed hose.
- Remove the master cylinder reservoir bolt (1).
- Lift the master cylinder reservoir (1) upward to release the reservoir from the reservoir seals and the master cylinder.
- Remove the 2 master cylinder reservoir seals (1).