Parking Brake Cable Adjuster Enabling (Without J77)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Hold the park brake pedal in the FULL upward position.
- Pull rearward on the front park brake cable until the tension is released from the tool (1) installed in the pedal assembly.
- Remove the tool.
- Slowly release the park brake cable until it returns to its original position.
- Release the park brake pedal.
- Install the left side underbody front air deflector. Refer to Underbody Front Air Deflector Replacement - Left Side .
- Lower the vehicle.
- Apply and release the park brake pedal 3 times.
- Install the left side instrument panel lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement (Left Side)Instrument Panel Lower Trim Panel Insulator Replacement (Right Side) .