Engine Front Cover Removal

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Accessory Drive Belt Tensioner And Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the accessory drive belt tensioner bolt (1).
Remove the accessory drive belt tensioner (2).

Fig 2: Engine Front Cover Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the engine front cover bolts (2-7, 9).
Discard bolts 3, 4, and 6.
Remove the engine front cover (1).
Ensure proper use of room temperature vulcanizing (RTV) sealant. Refer to Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Clean and Inspect the engine front cover mating surface.
Remove the front oil seal (8) with an appropriate tool.