Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the instrument panel upper trim panel (1) secured by 11 retainers to the instrument panel carrier.
- Install the bolts (1) securing the top of the instrument panel upper trim panel to the instrument panel carrier.
- Install the bolts (1) securing the instrument panel inflatable restraint module bracket to the instrument panel tie bar and tighten to 9 N.m (80 lb in).
- Install the bolts (1) securing the top of the instrument panel upper trim panel to the instrument panel carrier.
- Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
- Install the instrument panel extension. Refer to Instrument Panel Extension Replacement .
- Install the radio control assembly. Refer to Radio Control Assembly Replacement .
- Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement .
CAUTION:
Refer to Fastener Caution .