Windshield Garnish Molding Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Windshield Garnish Molding Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling .
1	Windshield Garnish Molding Assembly Procedure Disconnect the electrical connector. The tether clip at the upper portion of the garnish molding MUST be replaced every time the windshield side garnish molding is removed.

Callout

Component Name

Preliminary Procedure
Disable the SIR system. Refer to SIR Disabling and Enabling .

Windshield Garnish Molding Assembly

Procedure

Disconnect the electrical connector.
The tether clip at the upper portion of the garnish molding MUST be replaced every time the windshield side garnish molding is removed.