Vacuum Pump Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Vacuum Pump & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the intake manifold cover. Intake Manifold Cover Replacement Remove the plenum front panel. Plenum Front Panel Replacement Remove the outer fuel pump insulator. Fuel Pump Insulator Replacement (Inner) Fuel Pump Insulator Replacement (Outer) Disconnect the vacuum hose from the vacuum pump. Plastic Collar Quick Connect Fitting Service
1	Vacuum Pump Fasteners (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Vacuum Pump
3	Vacuum Pump Gasket NOTE: Inspect the gasket and replace if necessary.