Transmission Case Bearing Race and Shift Control Components Removal

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Case Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Transmission Intermediate Case Locating Pin
2	Manual Transmission Shift Lever Rod Bushing Procedure Install the DT 49216 bushing remover into the bushing. Install the J 23907-1 slide hammer into the remover. Remove the bushing. Special Tools DT 49216 Bushing Remover J 23907-1 Slide Hammer For equivalent regional tools, refer to Special Tools .
3	Counter Gear Bearing Race
4	Main Shaft Bearing Race
5	Shift Control Shaft Position Guide
6	Shift Control Shaft Position Guide Bolt/Screw