Transmission Case Shift Shaft Bearing Installation

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Shift Shaft Bearing Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Shift Shaft Bearing Assembly Procedure Install the J 44384 shift fork bearing installer into the bearing. Install the J 36190 driver handle into the remover. Install the bearing. Special Tools J 36190 Driver Handle J 44384 Shift Fork Bearing Installer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Shift Shaft Bearing Assembly

Procedure

Install the J 44384 shift fork bearing installer into the bearing.
Install the J 36190 driver handle into the remover.
Install the bearing.

Special Tools
J 36190 Driver Handle
J 44384 Shift Fork Bearing Installer
For equivalent regional tools, refer to Special Tools .