LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Manual Transmission - TREMEC 6-Speed (M3L Mg9)) >> Repair Instructions - Off Vehicle >> Shimming Procedures (MG9) >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

J 8001  Dial Indicator Set

For equivalent regional tools, refer to Special Tools .

NOTE:

The shimming procedure is required to be performed during service only when the following parts are replaced:

  • The input shaft
  • The counter shaft
  • The main shaft
  • The adapter plate
  • The main housing
  • The extension housing
scientia non olet · About LEMON Manuals