Shift Shaft Bearing Removal

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Shift Shaft Bearing

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Shift Shaft Bearing Assembly Procedure Install the DT 49216 bushing remover (2) into the bearing. Install the J 23907-1 slide hammer (3) into the remover. Remove the bearing. Special Tools DT 49216 Bushing Remover J 23907-1 Slide Hammer For equivalent regional tools, refer to Special Tools .