Propeller Shaft Oil Seal, Reverse Sensor, and Speed Sensor Installation

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Propeller Shaft Oil Seal, Reverse Sensor, Speed Sensor & Seal

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Propeller Shaft Oil Seal Procedure Install the DT 37212 front output shaft seal installer into the seal. Install the seal. Special Tools DT 37212 Front Output Shaft Seal Installer For equivalent regional tools, refer to Special Tools .
2	Vehicle Speed Sensor Seal (O-ring)
3	Manual Transmission Output Speed Sensor Assembly
4	Transmission Speed Sensor Bolt/Screw Tighten 10 N.m (89 lb in)
5	Reverse Sensor Tighten 27 N.m (20 lb ft)