Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Fluid Cooler Pipe

Courtesy of GENERAL MOTORS COMPANY

Install Transmission Fluid Cooler Pipe(Mid Line Left) (1)

Fig 2: Transmission Fluid Cooler Pipe Fitting Retainer At Transmission Fluid Cooler Pipe

Courtesy of GENERAL MOTORS COMPANY

Install Transmission Fluid Cooler Pipe Fitting Retainer (1) @Transmission Fluid Cooler Pipe(Rear Differential Inlet Hose)Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Install Transmission Fluid Cooler Pipe(Mid Line Left) (2) @Transmission Fluid Cooler Pipe(Rear Differential Inlet Hose)

Fig 3: Transmission Fluid Cooler Pipe Fitting Retainer At Transmission Fluid Cooler Pipe

Courtesy of GENERAL MOTORS COMPANY

Install Transmission Fluid Cooler Pipe Fitting Retainer (1)@Transmission Fluid Cooler Pipe(Mid Line Left)Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Install Transmission Fluid Cooler Pipe(Mid Line Left) (2) @Transmission Fluid Cooler Pipe(Front Jumper Left)

Fig 4: Left Side Underbody Front Air Deflector Bolt And Transmission Fluid Cooler Pipe Clips

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Refer to Fastener Caution .

Install the left side underbody front air deflector bolt (1) and tighten to 9 N.m 80 lb in).
Install the transmission fluid cooler pipe clips (2) in the left side underbody front air deflector.
Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level Inspection (MG9)
Inspect for transmission fluid leaks.