Rear Compartment Lid Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Compartment Lid & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
1	Rear Compartment Lid Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Rear Compartment Lid Procedure Disconnect the electrical connector. Remove the rear compartment with the aid of an assistant. Transfer parts as needed. Adjust the rear compartment lid if needed. Refer to Rear Compartment Lid Adjustment Rear Compartment Lid Adjustment (ATS-V) .

Callout

Component Name

Preliminary Procedures

Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

Rear Compartment Lid Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Rear Compartment Lid

Procedure

Disconnect the electrical connector.
Remove the rear compartment with the aid of an assistant.
Transfer parts as needed.
Adjust the rear compartment lid if needed. Refer to Rear Compartment Lid Adjustment Rear Compartment Lid Adjustment (ATS-V) .