Front Side Door Upper Hinge and Lower Hinge Replacement (Sedan)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Side Door Upper Hinge and Lower Hinge (Sedan)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front fender. Refer to Front Fender Replacement .
1	Front Side Door Upper Hinge to Body Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Mark the location of the hinge before removing the bolts with a grease pencil. Support the door before removing the hinge bolts. Disconnect the door electrical connector. Tighten 32 N.m (24 lb ft)
2	Front Side Door Upper Hinge to Door Bolt (Qty: 2) Tighten 25 N.m (18 lb ft)
3	Front Side Door Upper Hinge
4	Front Side Door Lower Hinge to Body Bolt (Qty: 2) Tighten 32 N.m (24 lb ft)
5	Front Side Door Lower Hinge to Door Bolt (Qty: 2) Tighten 25 N.m (18 lb ft)
6	Front Side Door Lower Hinge Procedure Check the door for proper alignment, adjust as necessary. Refer to Front Side Door Adjustment .