LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Fender Front Brace Replacement

Front Fender Front Brace Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Fender Front Brace & Bolts
GM2810364Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia ReplacementFront Bumper Fascia Replacement (V) .
  2. Remove the headlamp. Refer to Headlamp Replacement (Sedan)Headlamp Replacement (Coupe with HID)Headlamp Replacement (Coupe with Halogen) .
  3. If replacing the left side fender brace, remove the air intake splash shield. Refer to Intake Air Splash Shield Replacement , for the 2.0L (LTG) or 2.5L (LCV) engine or Intake Air Splash Shield Replacement for the 2.8L, 3.0L, 3.2L, or 3.6L engine.
1 Front Fender Front Brace Bolt (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Front Fender Front Brace

Procedure

  1. Disconnect the electrical harness from the front fender front brace.
  2. Transfer parts as needed.
scientia non olet · About LEMON Manuals