Engine Coolant Thermostat Housing Replacement (LTG)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Thermostat Housing (LTG)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Air Cleaner Assembly Replacement (LTG) Reposition Radiator Outlet Hose@Engine Coolant Thermostat Housing - Radiator Outlet Hose Replacement (LTG without V03) Radiator Outlet Hose Replacement (LTG with V03)
1	Engine Coolant Thermostat Housing Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Engine Coolant Thermostat Housing Seal Procedure Install a NEW engine coolant thermostat housing seal.
3	Engine Coolant Thermostat Housing Procedure Clean the engine oil cooler housing to engine coolant thermostat housing sealing surfaces.