LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Controls And Fuel - 3.6L (LGX LF4) - Repair Instructions) >> Repair Instructions >> Fuel Pipe Shield Replacement (LGX) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Pipe Shield
    GM4093852Courtesy of GENERAL MOTORS COMPANY
  1. Install Fuel Pipe Shield (1)
    2. Fig 2: Fuel Pipe Shield Bolts
    GM4093848Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install and tighten Fuel Pipe Shield Bolts (1) (Qty: 2) to 9 N.m (80 lb in)
    3. Fig 3: Fuel Pipe Shield Bolts
    GM4093839Courtesy of GENERAL MOTORS COMPANY
  3. Install and tighten Fuel Pipe Shield Bolts (1) (Qty: 2) to 9 N.m (80 lb in)
    4. Fig 4: Retainer And Fuel Pipe Shield
    GM4093796Courtesy of GENERAL MOTORS COMPANY
  4. Install Retainer (1) @ Fuel Pipe Shield (2)
  5. Install Plenum Front Panel. Refer to Plenum Front Panel Replacement
scientia non olet · About LEMON Manuals