Fuel Feed Pipe Replacement (LGX at Engine)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Feed Pipe - (LGX At Engine)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Relieve the system fuel pressure. Refer to Fuel Pressure Relief Remove Intake Manifold. Refer to Intake Manifold Replacement (LGX) Remove Engine Rear Noise Shield. Refer to Engine Rear Noise Shield Replacement (LGX)
1	Fuel Feed Pipe Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Quick Connect Fitting (Qty: 2) Refer to Metal Collar Quick Connect Fitting Service
3	Fuel Feed Pipe Procedure Ensure that the high pressure fuel pipe, and fuel pump fittings are clean and dry prior to assembly. Pressurize the fuel system and check for leaks.