Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief
- Remove Engine Rear Noise Shield. Refer to Engine Rear Noise Shield Replacement (LF4)
- Disconnect the Fuel Feed Pipe - Fuel Tank to Engine from the Fuel Feed Pipe - at Engine. Refer to Fuel Feed Pipe Replacement (Fuel Tank To Engine LF4) Fuel Feed Pipe Replacement (LF4 at Engine)
- Unclip Electrical Connector (1) (Qty: 2) @ Fuel Feed Pipe Bracket (2)
- Remove Fuel Feed Pipe Bolts (1) (Qty: 2)
- Loosen Fuel Feed Pipe Fitting (1)
- Remove and DISCARD Fuel Feed Pipe (2)