Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the evaporative emission canister purge tube. Refer to Evaporative Emission Canister Purge Tube Replacement (LGX)
- Remove the evaporative emission hose (1) from the retainers (2).
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (ATS)
- Remove the underbody front air deflector right side. Refer to Underbody Front Air Deflector Replacement - Right Side
- Remove the front body exhaust heat shield right side. Refer to Front Body Exhaust Heat Shield Replacement (Right)
- Remove the right side catalytic converter and exhaust. Refer to Exhaust System Replacement (LGX)
- Disconnect the evaporative emission hose (1) and remove from retainers (2). Refer to Plastic Collar Quick Connect Fitting Service
- Remove the evaporative emission hose (1) from the vehicle.
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .