Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Cleaner Outlet Rear Duct, Clamp And Retainer Spring

Courtesy of GENERAL MOTORS COMPANY

Install Air Cleaner Outlet Rear Duct (3)
Connect the electrical connector.
Engage Retainer Spring (2) @ Air Cleaner Outlet Rear Duct (3)

CAUTION:

Refer to Fastener Caution .

NOTE:

Ensure the outlet duct is fully seated to the mating surfaces before clamping. Verify that the cuff is not rolled under.

Install Air Cleaner Outlet Rear Duct Clamp (1) @ Air Cleaner Outlet Front Duct 4 N.m (35 lb in)

Fig 2: Positive Crankcase Ventilation Tube, Air Cleaner Outlet Rear Duct And Clamp

Courtesy of GENERAL MOTORS COMPANY

Install Positive Crankcase Ventilation Tube (2) @ Air Cleaner Outlet Rear Duct (3)
Install Air Cleaner Outlet Rear Duct Clamp (1) @ Positive Crankcase Ventilation Tube (2) 4 N.m (35 lb in)

Fig 3: Charge Air Bypass Valve Hose, Air Cleaner Outlet Rear Duct And Clamp

Courtesy of GENERAL MOTORS COMPANY

Install Charge Air Bypass Valve Hose (2) @ Air Cleaner Outlet Rear Duct (3)
Install Charge Air Bypass Valve Hose Clamp (1) @ Charge Air Bypass Valve Hose (2) 4 N.m (35 lb in)
Install Intake Manifold Cover. Refer to Intake Manifold Cover Replacement (LF4)